euroquartz limited blacknell lane crewkerne somerset uk ta18 7he tel: +44 (0)1460 230000 fax: +44 (0)1460 230001 info@euroquartz.co.uk www.euroquartz.co.uk euro quartz description HDW576 series lvds output oscillators cover the frequency range 750khz to 800mhz. the design contains a high 'q' fundamental crystal and a multiplier circuit. integrated phase jitter is 4.0ps maximum. outline & dimensions frequency range: 750khz to 800.0mhz output logic lvds phase noise: see table frequency stability: see table operating temp range commercial: -10 to +70c industrial: -40 to +85c input voltage: +3.3vdc 5% output logic high '1' v oh : 1.4v typical, 1.6v max. low '0' v ol : 0.9v min., 1.1v typical differential output voltage v od : 247mv min., 355mv typ., 454mv max. output 1 - output 2 differential output error dv od : -50mv min., 50mv max. output offset voltage v os : 1.125v min., 1.20v typ., 1.375v max. offset magnitude error dv os : 0mv min., 3mv typ., 25mv max. rise/fall times: 0.7ns typical, 1.0ns max. (20% to 80% of lvds waveform) current consumption (15pf load): <24mhz: 25ma max. 24.01 to 96mhz: 45ma max. 96.01 to 800mhz: 80ma max. load: 50 w from each output start-up time: 5ms typ., 10ms max. duty cycle: 50%5% (at 1.5v) drive capability: 100 ohms between outputs input static discharge prot: 2kv min. storage temperature range: -55c to +150c ageing: 3ppm per year max., 2ppm thereafter. at t amb +25c enable/disable no connection: both outputs enabled disable: both outputs are disabled when control pad is taken below 0.3v referenced to ground. oscillator is always 'on'. (special request - oscillator is off when disabled.) enable: both outputs are enabled when control pad is taken above 0.7 vcc referenced to ground. absolute maximum ratings ( permanent damage may be caused if operated beyond these limits. ) supply voltage vdd: +4.6vdc max. input voltage vi: vss -0.5 min., vdd +0.5v max. input voltage vo: vss -0.5 min., vdd +0.5v max. specification part numbers HDW576 oscillator part numbers are derived as follows: example: 3HDW5762-a-250.000 HDW576 lvds oscillators supply voltage 3 = 3.3vdc series designation package style 5761 or 5762 stability code (see table) frequency stability over temperature range stability temperature range order code ppm c 25 -10 to +70 a 50 -10 to +70 b 100 -10 to +70 c 25 -40 to +85 d 50 -40 to +85 e 100 -40 to +85 f offset 10hz -60 100hz -90 1khz -115 10khz -125 100khz -119 1mhz -120 10mhz -140 dbc/hz phase noise (155.520mhz) typ. 2.6ps 4.0ps 4.3ps 27ps max. integrated phase jitter: (12khz to 20mhz) period jitter: (rms) period jitter: (peak to peak) jitter (155.520mhz) 7 x 5 x 1.8mm 6 pad smd 750khz to 800.0mhz
|